Skip to main content

What is a Pneumatic Tube Transport System?

Pneumatic Tube Transport System

The history of pneumatic tube systems can be traced back to the 1850s. The first operating system was built by engineer Josiah Latimer Clark and went into operation at the London Telegraph Office in 1853. Shorter paths for rapid transport were created: Letters, telegrams and even parcels were put in cylindrical containers and sent through the tubes. Colored markings served as identification for the various shipments.

Particularly for the stock market, it was an important and, above all, fast method of communication at that time: if messages were not delivered in a timely manner, speculators ran the risk of losing a fortune. More and more pneumatic tube systems were also used in retail trade, banks, and the chemical and automotive industries – mostly to transmit production samples to laboratories. High quality was ensured.

In the course of the 19th and 20th centuries, the air system became established in other cities besides London. Mail was sent by the Prague tube network until 2002 – the longest time an air system was used for mail deliveries. However, transport through the underground became increasingly difficult over the years. More and more disruptions occurred, individual tube sections shifted underground and maintenance work became more complicated.

The concept of a pneumatic tube system has not changed since its development many years ago: each system is powered by air. 

For carriers that need to be transported several floors upwards, compressed air is required. To transport pneumatic tube carriers to a lower floor, it is sucked in by the help of air. Horizontal transport works with both compressed air and by suction depending on the system. The pneumatic tube software is used to transmit information about the level where individual pneumatic tube stations are located as well as where to transport the individual carriers.

Most installations that operate with an air compressor use air diverters. These are usually located above the compressor and regulate whether the carrier in a pneumatic tube system is conveyed by compressed air or by suction. The air switches are thus responsible for the air compressor to change from pressure to suction and vice versa.

Several switches in the individual transport pipes ensure that the correct station is addressed. As soon as a carrier is routed to another branch of the tube, the information is transmitted via the pneumatic tube software. Frequency converters on the blower are used to prevent containers from being transported too fast. They slow down the journeys within the pneumatic tube network, preventing the carrier and its contents from being damaged.

Comments

Popular posts from this blog

How do Ants sense Food?

  S ugar has a slight odor, particularly granulated beet sugar. While all species of ants can differentiate between a wide variety of odors, the smelling range differs from a few centimeters to meters. Desert ants can smell sugar from up to 3 meters. the food sources that ants cannot smell from a distance they 'smell' it (contact chemoreception) by touching it. So in a way, all the food they detect, they detect it by smelling. So yes, ants smell (although contact chemoreception is more like taste) the sugar. The ant colonies send scout ants to search for food in various directions, often up to a range of 100 to 200 meters.(Depends on the territorial boundary and time of the year). The scout marches steadily in less circuitous paths initially if it has memories of previous feeder locations. (Ants use visual landmarks, and a stereo-smell system to create an odor map and navigate) Periodically it will halt and look for olfactory cues. It will then take into a more circuitous rando...

What is the smallest possible Distance in The Universe?

In physics, the Planck length, denoted ℓP, is a unit of length that is the distance light travels in one unit of Planck time. It is also the reduced Compton wavelength of a particle with Planck mass. It is equal to 5.72938×10⁻³⁵ m (Lorentz–Heaviside version) or 1.61623×10⁻³⁵ m (Gaussian version). It is a base unit in the system of Planck units, developed by physicist Max Planck. The Planck length can be defined from three fundamental physical constants: the speed of light in a vacuum, the Planck constant, and the gravitational constant. It is the smallest distance about which current, experimentally corroborated, models of physics can make meaningful statements. At such small distances, the conventional laws of macro-physics no longer apply, and even relativistic physics requires special treatment. The smallest possible size for anything in the universe is the Planck Length, which is 1.6 x10 -35 m across. It is impossible to determine the difference between two locations less than one ...

What is The International Space Station?

  The International Space Station is a large spacecraft. It orbits around Earth. It is a home where astronauts live. The space station is also a science lab. Many countries worked together to build it. They also work together to use it. The space station is made of many pieces. The pieces were put together in space by astronauts.  The ISS consists of pressurized modules, external trusses, solar arrays and other components. ISS components have been launched by Russian Proton and Soyuzrockets as well as American Space Shuttles. The space station's orbit is about 220 miles above Earth. NASA and other space agencies uses the station to learn about living and working in space. The first piece of the International Space Station was launched in 1998. A Russian rocket launched that piece. After that, more pieces were added. Two years later, the station was ready for people. The first crew arrived in October 2000. People have lived on the space station ever since. Over time more pieces...